350mm 220v 1500w Halogen Infrared Heat Lamp for Pet Blowing Machines Plastic Moulding on IR UV Forums

29.5 inches 1000w carbon heating element

Thu, 30 Jul 2026 15:24:14 +0800

Let’s Talk About Our 29.5" 1000W Carbon Heating Elements

If you need a lot of heat, and you need it now, these are the elements you’re looking for. We built these for high-output infrared jobs where waiting for a slow warm-up just isn’t an option. At 1000W and nearly 30 inches long, they cover a massive area without leaving any cold spots behind. The Power Side of Things Because of that 29.5-inch length, the heat spreads out evenly. You won’t have to worry about those annoying “hot zones” that warp your materials or scorch your product. It just works. But a quick heads-up: don’t cheap out on your wiring. If your cables are too thin, you’ll get a voltage drop and your output will tank. Just double-check your gauge before you plug everything in. Trust me, it’s worth the extra minute. Why Carbon? Inside that high-purity quartz tube, we’ve got carbon fiber filaments. These are a different beast than your old-school metal coils. Instead of just hitting the surface, the infrared heat actually sinks deeper into whatever you’re heating. Now, here is the most important part:do not touch the quartz with your bare hands. I know it sounds picky, but the oils from your skin leave invisible marks. When the element heats up, those spots create tension, and pop—your tube cracks. Use gloves. Always. Making Them Work for You These are usually a perfect fit for PET blowing machines or industrial drying tunnels. Since they’re so long, you can cover more ground with fewer lamps, which keeps your setup cleaner. Just keep in mind that a 30-inch glass tube is inherently fragile. If your machine vibrates, these tubes can snap if they’re rattling against the frame. Make sure your mounting clips are snug, but don’t over-tighten them. You want them secure, not crushed. Get the alignment right, and these things will last you a long time.

2500w Carbon Infrared Heating Lamp

Thu, 30 Jul 2026 00:49:34 +0800

Getting the Most Out of Your 2500W Carbon Infrared Lamps

When you’re dealing with heavy thermal loads and you absolutely cannot afford to wait for things to warm up, these 2500W carbon lamps are the way to go. They aren’t your typical resistive heaters. Because they use a carbon-based filament, they push out short-to-medium wave radiation. In plain English? The heat actually sinks into your materials way faster than those old-school quartz tubes ever could. A word of caution on the power side. Pushing 2500W into a small space is no joke. It puts a massive strain on your power supply to get that kind of heat flux. Before you flip the switch, double-check your wiring gauges and contactors. If they aren’t rated for a continuous heavy draw, you’re asking for trouble. And please, look at your cooling fans. If they can’t keep up with the heat buildup around the lamp, you’ll likely end up with melted sockets. The build quality We wrap the carbon element in high-purity quartz so it hits operating temperature almost the second you turn it on. We usually stick with R7s or Sk15 end-caps. Why? Because a tight fit is everything. If the connection is even slightly loose, you’ll get an arc point, and that’s a one-way ticket to a melted housing. One nice thing about carbon is that it handles “thermal shock” much better than tungsten. You can cycle the power on and off frequently without worrying about the filament giving up on you. Where these actually live You’ll mostly see these working hard in industrial drying tunnels or PET blowing machines. When you’re working with polymers, you need that instant response to keep your temperature control precise. But here’s the catch: high wattage makes them sensitive. If your voltage jumps around, the filament thins out and snaps way sooner than it should. My advice? Use a stabilized power source. It’ll save you a lot of headaches. As long as the length and connectors match your current rig, these should slide right in as a replacement for your existing IR arrays.

360mm 700w carbon fiber infrared heat lamps

Wed, 29 Jul 2026 00:46:05 +0800

Let’s talk about these 360mm 700W Carbon Fiber Lamps

If you’re dealing with heavy thermal loads and you need your heat to hit now, these lamps are your best bet. Most people are used to quartz heaters, but these are different. We use a carbon fiber filament that puts out shortwave radiation. In plain English? The heat doesn’t bother wasting time warming up the air around the part. It just goes straight into the material. The power side of things At 700W over 360mm, you’ve got a sweet spot. It’s plenty of punch to get the job done, but it won’t melt your lamp housing if you’re careful. It’s incredibly fast. But here’s the catch: your power supply needs to be rock solid. If you’ve got voltage spikes jumping around, you’ll fry that carbon filament way faster than you would with an old-school tungsten wire. Keep it steady. Why carbon fiber? Metal filaments hate it when things get hot and cold quickly—they expand, they shrink, and eventually, they snap. Carbon fiber handles that stress much better. It’s tougher. Plus, because of how the light spectrum shifts, you aren’t wasting energy heating up your conveyor belt or the frame of your machine. The heat actually goes where it belongs: the workpiece. One quick tip: if you’re dropping these into an old rig,**clean your reflectors.**A dusty or dirty reflector basically kills the efficiency of a carbon lamp. It’s not worth the waste. Getting them to work for you These are pretty easy to swap into most industrial drying or curing lines. You can get them wired up in no time. Just keep in mind that they don’t “throw” heat the same way halogen tubes do. You might find you need to tweak your PID settings or move the lamp a little closer to the target to hit your temperature goals. And a word of warning: don’t run these at 100% all day without some decent ventilation. If the heat just sits there, those end caps are going to take a beating. Give them some room to breathe.

Clear Carbon Fiber Far Infrared Heat Lamp

Mon, 27 Jul 2026 15:18:38 +0800

Let’s Talk About Clear Carbon Fiber Heat Lamps

Ever deal with those annoying shortwave emitters that scorch the surface of your product before the inside even gets warm? Yeah, it’s a pain. That’s exactly why we build our clear carbon fiber far-infrared lamps. Instead of old-school metal coils, we use a carbon fiber filament tucked inside high-purity quartz. Carbon fiber just handles the heat better. It doesn’t freak out at high temperatures, and it spreads the heat evenly across the whole tube. No more weird cold spots. The Nitty-Gritty on Power Depending on the size of your machine, we can tweak the wattage and voltage to fit your space. If you need things to warm up fast, go for the high-wattage setup. Just a heads-up: make sure your wiring and power supply can actually handle that kind of draw. Some people go with high voltage to keep the amperage down. That works, but it makes the heat density jump. If you do that, double-check your cooling fans. You don’t want your lamp sockets melting because they got too hot. Why Quartz and Carbon? We use clear quartz glass because it lets the infrared rays slide right through without getting trapped. To make your life easier, we use standard R7s or SK15 connectors. You can basically just pop them into your existing setup and get back to work. Here’s the trade-off: you won’t get that “instant hit” you feel with a halogen lamp. But in exchange, you get a deep, consistent soak that reaches the core of your workpiece. It’s a slower burn, but a much better result. Where This Actually Matters You’ll see these doing the heavy lifting in PET blowing, plastic curing, and industrial drying lines. Since it’s far-infrared, you can heat the center of a part without burning the outer skin. Pro tip: hook these up to a PID controller if you want total control over your temperature ramps. One last thing—keep the glass clean. If you’re working in a place with lots of dust or oil, wipe those tubes down. Any gunk buildup creates hot spots, and that’s the fastest way to kill a lamp.

Customize Clear 230v 1800w Quartz Carbon Heating Tube

Sat, 25 Jul 2026 00:57:04 +0800

Let’s talk about our 230V 1800W Quartz Carbon Heating Tubes

If you need heat—and you need it now—these tubes are your best bet. We built them specifically for those jobs where waiting for a heater to warm up just isn’t an option. By pairing a carbon filament with high-purity quartz, we’ve made something that hits its operating temperature way faster than those old-school metal alloy elements. The Power Stuff At 230V and 1800W, these fit right into most industrial setups. The real magic is how the heat is concentrated. It uses short-wave infrared radiation to throw heat directly at your material. Basically, you get a ton of power in a very small space. This is great because you can shrink your heater’s footprint without losing any punch. We can even tweak the length to fit your specific chassis. Just a heads-up, though: if we cram 1800W into a shorter tube, the surface gets incredibly hot. Make sure your housing can handle that kind of intensity. Why Carbon and Quartz? Here is the thing about carbon filaments: they put out a much wider infrared spectrum than nichrome wires. Then we wrap that in clear quartz glass, which lets the heat slide right through without getting trapped inside the tube. More energy hits your workpiece. Less energy is wasted. We’ve built these to handle the stress of heating and cooling, but they have one weakness:fingerprints. Please, don’t touch the glass with oily hands. Those little oils create hotspots that can actually crack the quartz when things get hot. Getting Them to Work These are pretty much “plug and play” for PET blowing or industrial drying lines. We’ll even wire them to your specific connectors so you aren’t fighting with the installation. But there is a trade-off. Because they’re so intense, that filament takes a beating over time. To keep them from burning out too early, I really recommend using a PID controller. It stops the heater from cycling too aggressively. A bit of precise voltage regulation goes a long way in making these last.

Half Gold Reflector Carbon Fiber Heating Lamp

Fri, 24 Jul 2026 07:24:55 +0800

Let’s talk about the Half Gold Carbon Fiber Lamp

We built these lamps for one reason: to get heat where it needs to go, fast. If you’ve used standard quartz heaters, you know the wait. These are different. The carbon fiber filament snaps to temperature almost instantly. But the real secret is that “half gold” coating. Think of it like a mirror. By putting gold on just one side of the tube, we push all that infrared energy in one direction. Instead of the heat soaking back into your machine and warming up the housing (which is a waste), it hits your workpiece head-on. Getting the power right You’ve got to match your voltage and wattage to what you’re actually heating. These high-wattage tubes put out intense short-wave radiation. It’s the kind of heat that sinks deep into the material, rather than just sitting on the surface. It’s great for speeding up your cycle times. But a word of warning: this stuff getshot. Seriously hot. Make sure your wiring and brackets can handle the temperature. If you use cheap wires or crowd them too close, they’ll melt. Simple as that. Fitting them in We kept the connectors standard. That means you can usually just pop these into your existing setup without a headache. The quartz shell does the heavy lifting here—it keeps the carbon filament from oxidizing while letting the IR waves fly right through. Then the gold layer kicks in, reflecting the heat that would otherwise just vanish into thin air. A few things to watch out for These lamps are tough, but they aren’t bulletproof. The gold coating is a bit picky about its environment. If your shop is full of oil mist or corrosive fumes, that reflector is going to take a hit over time. When the gold degrades, your efficiency drops. The fix is easy: keep them clean. A quick, soft wipe-down during your regular maintenance prevents you from losing 10-15% of your heat to a layer of grime. It takes two minutes, and it keeps everything running exactly how it should.

1000mm carbon fiber infrared heating lamp 1500w carbon infrared heating tube

Fri, 24 Jul 2026 07:08:57 +0800

Let’s talk about the 1000mm 1500W Carbon Fiber Infrared Tube

We built these lamps for those moments when you need heat—and you need it now—across a wide area. At a full meter long, you get a massive heating footprint. Pair that with 1500W of power, and you’ve got enough punch to get deep into your materials without having to mess around with crazy high voltage. The deal with the heat distribution When you spread 1500W across a tube this long, the heat stays steady. It’s consistent. You don’t have to worry about those annoying “cold spots” that usually pop up when you try to cram too much power into a shorter tube. If you’re working with a large surface and need it heated evenly from end to end, this is your best bet. Why carbon fiber? Forget those old quartz heaters with the metal coils. We went with a carbon fiber filament. Why? Because it hits operating temperature way faster. It puts out medium-to-long wave infrared radiation, which is just a fancy way of saying it’s a perfect match for plastics and organic materials. They soak up this kind of heat much better. Now, a quick heads-up: the filament lives inside a high-purity quartz envelope to keep it from oxidizing. But that glass is the only thing protecting the carbon. If that seal breaks, the filament is gone in a heartbeat. Just be careful with your mounting brackets—don’t squeeze the glass ends too hard or you’ll be replacing the lamp. Getting it up and running Wiring these into your industrial panels is pretty straightforward. They play nice with standard PID controllers. And since they don’t hold onto a lot of thermal mass, they react almost instantly when you tweak the power. It feels snappy. But here’s the thing… carbon fiber is a bit more delicate than those chunky metal-sheathed heaters. They can’t take a hit. If your shop has a lot of vibration or things tend to bump into the equipment, definitely throw some protective shielding over them. And please, don’t forget the ventilation. 1500W puts out a lot of heat. If your housing isn’t designed to breathe, you’re going to bake your electronics.

carbon fiber lamp ir lamp infrared lamp heat lamp

Thu, 23 Jul 2026 01:18:03 +0800

Getting the Most Out of Carbon Fiber IR Lamps

Standard metal filaments are fine, but carbon fiber is a different beast. Instead of just getting hot, these emitters use a specific infrared spectrum. The result? They ramp up way faster and don’t need to reach crazy surface temperatures to get the job done. The physics of it all Here’s the thing: unlike your typical halogen tubes, carbon fiber has a broader emission curve. In plain English, the heat actually sinks deeper into whatever you’re heating. You get a massive hit of thermal energy without pushing the quartz tube to the breaking point. It’s a lot more efficient. But a word of caution. If you’re squeezing a high-wattage tube into a tiny space, you’ve got to think about your airflow. If that heat has nowhere to go, the ends will burn out and the glass will stress.Keep it breathing. Putting them to work The filament lives inside a quartz envelope to keep it from oxidizing. When it comes to wiring, we’ve got you covered with options like R7s or Sk15. They fit tight, which means you don’t have to worry about arcing at the terminals. Depending on what you’re heating, you might want a specialized coating. This shifts the energy from short-wave to medium-wave. It’s a lifesaver for materials that usually just bounce the heat right back. Where this actually matters If you’re doing PET blowing, paint curing, or plastic welding, these are your best friend. They’re a perfect swap for those clunky, aging heating elements. Your cycle times will drop because the carbon filament hits its stride almost instantly. One last tip: they’re tough, but they aren’t invincible. If your machinery shakes or vibrates, those tubes can take a beating.**Tighten your mounting brackets.**It’s a small step that saves you from a mechanical failure at the seal.

heat lamp carbon fiber ir quartz for pet bottle blowing 800w/1000w/1500w

Wed, 22 Jul 2026 01:01:53 +0800

Getting Your PET Blowing Right with Carbon Fiber IR Lamps

If you’ve ever dealt with PET bottle blowing, you know the headache of “hot spots.” You get those annoying variations in wall thickness that just make the final bottle look off. That’s exactly why we built these carbon fiber infrared lamps. Unlike those old-school metal coils, these filaments spread the heat evenly across the whole tube. It just makes the preheating stage a lot smoother. Picking your power We’ve got three options: 800W, 1000W, and 1500W. The choice really comes down to how fast your line is moving and how heavy your preforms are. If you need to crank up your cycles per minute, the 1500W is your best bet because it hits that target temperature fast. Just a heads-up: make sure your wiring and power supply can actually handle the extra juice. You don’t want to be chasing tripped breakers in the middle of a shift. The secret sauce We wrap the carbon fiber element in high-purity quartz glass. Why? Because quartz can take a massive thermal shock and not crack. But the real magic is in the wavelength. Carbon fiber pushes heat into the plastic, warming it from the inside out. Standard halogen usually just scorches the surface, which isn’t nearly as effective. The practical stuff The good news is that these are basically drop-in replacements. They fit into most oven arrays and get your machine up to temp way faster. Now, there are a couple of things to keep in mind. Carbon fiber is more efficient, but it’s a bit more fragile than the cheap metal versions. If your shop floor is a bit chaotic—lots of vibration or rough handling during maintenance—do yourself a favor and use reinforced mounting clips. It’ll stop the tubes from snapping. And please, keep an eye on your airflow. If the ends of the lamps don’t get enough cooling, the seals will burn out way too soon. Keep them cool, and they’ll last.

u shape infrared carbon fiber heat lamp for printer

Mon, 20 Jul 2026 02:19:26 +0800

Let’s Talk About U-Shape Carbon Fiber IR Lamps

If you’re running industrial printers, you know the struggle of getting ink to dry perfectly without accidentally cooking your substrate. That’s why we build our U-shape carbon fiber infrared lamps. Instead of the usual quartz heaters, we put a carbon fiber filament inside a quartz tube. It changes the way the heat hits the ink. It sinks deep into the layers to cure everything thoroughly, but it’s gentle enough that you won’t scorch your materials. The magic of the U-shape Why the bend? Simple. It lets us pack twice the heating element into the same small space. You get way more radiating surface area without needing a bigger machine. It concentrates the heat right where the material passes through. The best part? Your machine warms up incredibly fast. You aren’t sitting around waiting for the heater to kick in, which means way less wasted material during your morning startup. Why carbon fiber actually works Tungsten is fine, but it can be brittle. Carbon fiber handles the “on-off-on-off” cycle of power much better. It doesn’t just snap when things get intense. We wrap that filament in high-purity quartz so the IR energy gets out without any roadblocks. And since these lamps don’t need to get blindingly hot to do their job, they don’t bake your printer’s chassis. Your hardware stays cooler, and it lasts longer. A few things to watch out for Here’s the catch: you have to be careful with your voltage. If you try to force more heat by over-volting the filament, you’ll burn through that carbon core pretty quickly. I’d suggest tweaking your PID controllers so you don’t get those aggressive power spikes. Most of the time, these are easy drop-in replacements for old heaters. Just double-check that the U-bend dimensions match your reflectors. If they’re off even a little, you’re basically throwing 20% of your heat away into the machine frame. Keep those reflectors polished. It’s a small chore, but it keeps everything running lean and mean.

1000w Clear Quartz Carbon Heating Tube for Laminating Machine

Sat, 18 Jul 2026 01:11:39 +0800

Getting the Most Out of Your 1000W Clear Quartz Heating Tube

If you’ve ever worked with laminating machines, you know the struggle. You need the heat to hit fast—fast enough to bond the film perfectly, but not so hot that you end up scorching your project. That’s exactly why we went with a 1000W carbon-filament design wrapped in clear quartz. The power behind the heat 1000W might just sound like a number, but in practice, it’s what keeps your rollers at a steady, reliable temperature. We designed these to pump out high-intensity shortwave infrared radiation. Basically, the heat punches right through the laminate layers. It’s quick. Much quicker than those old-school metallic elements. You spend less time waiting for the machine to warm up and more time actually getting work done. Why quartz and carbon? The clear quartz shell does two big jobs. It keeps the carbon filament from oxidizing (which would kill the tube) and lets the IR heat flow through without getting blocked. Now, carbon is a bit different than tungsten. It runs cooler but spreads the heat across a wider spectrum. This is a lifesaver because it stops those annoying “hot spots” from ruining your materials. One quick tip: keep the glass clean. High-purity quartz is great, but if you let dust or oils build up, the heat transfer drops. Keep it sparkling, or you’ll be replacing the tube way sooner than you should. The “Gotchas” and Installation These are designed to be simple drop-in replacements. Since the glass is clear, you can just glance at the filament to see if it’s still healthy without having to tear the whole unit apart. But here’s the thing: these tubes are fragile. They can’t take a beating. If your machine frame shakes or vibrates too much, the tubes will snap right at the seal. Make sure your mounting clips are snug—but not crushing—to give the glass room to expand as it heats up. And for heaven’s sake, use high-temp leads. You don’t want your insulation melting into a puddle near the terminals.

220v 1500w Carbon Fiber Heating Tube

Fri, 17 Jul 2026 01:05:58 +0800

Let’s talk about the 220V 1500W Carbon Fiber Heating Tube

We built this thing for those moments when you just can’t afford to wait around for a heater to warm up. If you’ve used old-school metal alloy elements, you know the drill—they take their sweet time. But these? We swapped the metal for carbon fiber. It hits operating temperature almost instantly. It’s fast. Really fast. And that changes the whole rhythm of your workday. The power side of things Running at 1500W on a 220V line puts this tube in a serious power bracket. Instead of a slow, gentle heat, you get a concentrated punch of infrared energy that sinks right into your materials. The best part is that it plugs right into most industrial grids. No messing around with bulky step-down transformers or complicated wiring. You just hook it up and go. Why carbon fiber? Here’s the thing: metal wires (like nichrome) tend to warp or get tired after they’ve been heated and cooled a thousand times. Carbon fiber doesn’t really do that. It stays steady. We wrap the filament in a quartz or ceramic sleeve to keep it from oxidizing. But a word of warning—that seal is everything. If it cracks, the filament burns out in a heartbeat. Just make sure your mounting brackets aren’t squeezing the glass ends too hard. Give it some breathing room. Where this actually helps You’ll mostly see these in PET blowing, plastic welding, or drying tunnels. If you’re still using old halogen lamps and you’re tired of the long warm-up cycles, these are a great swap. But look, there’s a trade-off. Carbon fiber is a bit more delicate than those chunky, cast-in-aluminum heaters. If your machine shakes or vibrates a lot, you’ll want to use dampened mounts so the tube doesn’t snap. And one last tip: at 1500W, things get hot—fast. Use high-temp lead wires. Trust me, you don’t want to find out the hard way that your insulation has melted at the terminals.

High quality 360mm 700w carbon fiber heating element

Tue, 23 Jun 2026 11:31:58 +0800

Introduction

We built this 360mm, 700W carbon fiber heating element for one simple reason: to be a straight-up replacement for industrial machines that need heat on demand. If you’re running blow molding, extrusion, or packaging gear, you know the drill. You need heat that gets there fast, stays rock-solid, and doesn’t quit when the shift runs long. This was built for that reality.

The Power, Voltage, and Size—Straight Talk

The 700W rating hits a sweet spot. It packs enough punch in a small footprint, but it doesn’t push the element into overdrive where it starts to stress out. With a 360mm active length, you get predictable coverage across standard barrel and die zones. So you can spec a zone without having to redesign the whole machine. Just make sure the voltage lines up before you wire it in. That keeps the current in the safe zone for most control panels, and it means your heat-up behavior is consistent—every single time.

infrared carbon fiber heater parts heating lamp

Fri, 19 Jun 2026 00:44:46 +0800

Infrared Carbon Fiber Heater Lamps: The Heat You Need, Where You Need It

We built these infrared carbon fiber heater lamps for one simple reason: standard convection heaters just can’t keep up when you need heat fast and focused. These lamps were born for industrial machines and processes that demand precision. Think quick startups, tight temperature control, and a footprint that doesn’t take up half your floor space.

Power in a Small Package

Here’s the heart of it: a carbon fiber element paired with halogen gas. A typical unit runs at 400V and 2500W. That’s serious power density, packed into a small footprint. The 300mm tube length keeps the heat concentrated, so you get intense output without turning your whole machine bay into a sauna. And because it’s shortwave infrared, the energy goes straight to the target. It penetrates quickly and heats what you need, when you need it—not the air around it.

Good Quality Infrared Carbon Heat Lamp Prices

Mon, 08 Jun 2026 01:28:06 +0800

Introduction

We build infrared carbon heat lamps for industrial work—the kind of heating jobs where you need speed and serious power, right away. These lamps turn electricity straight into infrared heat, warming the target without wasting time heating the air around it. When you order one, you’re not just buying a bulb. You’re buying a complete thermal setup that has to fit your exact electrical needs and your physical space.

The Real Talk on Power, Voltage, and Size

With carbon filament lamps, wattage and voltage are the two numbers that matter. They decide the current, the wire size you need, and how hard the contacts get worked. Take a common setup: 2500W at 400V. That keeps the current lower than a 220V version, which makes wiring easier and cuts voltage drop over long runs. Then there’s length. Most are around 300mm, and that sets the focal distance and your mounting footprint. Get the length right so it matches your reflector and your process window. Too short, and you miss coverage. Too long, and the fixture turns into a bulky headache.

Hot selling carbon fiber heating lamp 560mm 1500w ir carbon fiber heating lamp

Sat, 09 May 2026 09:47:05 +0800

What It Is

We built this carbon fiber infrared heating lamp for the real, gritty work on the factory floor. It’s a 560mm, 1500W powerhouse designed for jobs that demand fast, focused heat—without burning through energy. Think of it as a compact workhorse, built to handle the harsh conditions of a machine environment day in and day out. It’s all about giving you control, so your process stays consistent, every single time.

twin carbon fiber infrared heating lamp

Thu, 30 Apr 2026 09:02:17 +0800

Introduction

We built this twin carbon fiber infrared heating lamp for engineers who are squeezed for space but still need serious heat, fast. It’s not a general-purpose heater you throw at every problem. It’s a focused, compact powerhouse meant to slip into tight spots inside automated production cells, where speed and stable output are non-negotiable.

What Makes It Tick: Power, Voltage, and Size

At the heart of this lamp is the twin-tube design. That means two independent heating paths packed into a single unit. Most setups run at 400V and 2500W, which gives you a lot of heat from a short package—often about 300mm long. The 400V rating is a smart move, too. It keeps the current lower for the same power, so you don’t have to wrestle with oversized wiring or stressed contacts inside crowded equipment. But with that power density comes a reality check: it runs hot in a small footprint. Plan your mounting with that in mind, and make sure nearby parts can handle the heat. If you need a cooler profile, we can dial down the wattage, but you’ll trade some of that lightning-fast response and peak temperature.